The Debug Test feature lets you validate your test configuration by creating a logical copy of your test and running it at a low-scale. The test will run with 10 threads and for a maximum of 5 minutes or 100 iterations, whichever occurs first. Any test initiated by clicking the Debug Test button is considered as free and will not charge a credit or VUH (Virtual User Hours) for the test run.

• Run a Debug Test
• View Results of Debug Test Runs
• View Detailed Request and Response Data

Run a Debug Test

Note: The data for Debug Test runs is deleted after 30 days.

Follow these steps:

1. In Performance tab, click Tests.
2. Select a test that you want to debug.
3. Click the Debug Test button.
   
   
   
4. Review the configuration and click Start Debug Run.
   

A low-scale test run is created. Use the test run to validate your configuration.

Note: If you encounter the following error when starting a debug test, click here for more details. 
Bad Request: Multiple scenarios are not supported in Debug mode.

View Results of Debug Test Runs

Follow these steps:

1. Select a test.
2. Navigate to the History tab of the test configuration.
3. Select the Debug toggle.
   

You will see your Debug Test runs in Reports:

View Detailed Request and Response Data

Detailed request and response information can be found in the trace.jtl file that is added to the artifacts.zip file for Debug Test runs. 

Note: The Debug Test runs do not appear in test trends, the Reports drop-down menu, or the Show All Reports lists.  Also, they do not enforce or display a Passed/Failed status.